1.5″ Dewaxing Closed Column Extractor 90-270g

Description

DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. DO NOT USE INDOORS

*Note:  Column capacity may vary depending on the biomass density, moisture content and column packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, heavily dried, and/or lightly packed material can reduce capacity by 50%. 
For best results, we recommend to tightly pack coarse ground material.

Shop Dewaxing Closed Column Extractor

Key Features and :

• Dewaxing Spool Included for filter out and coagulating waxes and lipids.
• Compound Gauge with (-30)-160 PSI readout.
• Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
• This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.
• The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included
• Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended
• This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.

Professional Kit Adds the following:

• Compound Gauge
• Sight Glass
• Shower Head

Explorer Kit Automatically Includes
:

• 8″ x 8″ Platinum Cured Silicone Non-Stick Pad

• 1.5″ Dewaxer Tri-Clamp 304 Stainless Steel Material Tube

• Dewaxer Spool Sizes Specifications:

• 1.5″ x 12″ Dewaxer = 90G

• 1.5″ x 18″ Dewaxer= 135G

• 1.5″ x 24″ Dewaxer= 180G

• 1.5″ x 36″ Dewaxer = 270G

• 304 Stainless Steel Flare End Caps with Heavy Duty Stainless Steel Miniature Ball Valves

• 1/4″ Stainless Steel MNPT Drain Plug

• (1) 1.5″ Standard Pressure Tri-Clamp Clamps

• 1.5″ Tri-Clamp Quadpod

• (2) Buna-N Tri-Clamp Gaskets

• Buna-N 100 Mesh (150 Micron) Gasket

***Note: Parts and components can be subject to substitutions. Any substituted parts will have the same function and will be of equal or greater value.****

Cylinder Volume

Radius (in)1.5″2″3″4″6″8″10″12″ Length (in)
Volume (in³)

Select Material

ButaneISO-ButanePropane

How Much Will Fit in Cylinder

Formula
Volume x Weight of Water x Specific Gravity

Constants
Weight of Water = 0.0360 (lbs / in³)
Specific Gravity of =

Lbs. of : Recommended:
Account for an 80% fill to avoid a hydraulic lock 

How Much Material Will Fit in the Cylinder

Volume

Cans of Butane by Size

Pounds of Butane